cs501 midterm solved papers by moaaz mega file

Views: 0

[whohit] cs501 midterm solved papers by moaaz mega file [/whohit]

cs501 midterm solved papers by moaaz mega file

Registers: The area with the “12” label in Figure 6. enables, the user can see the values are available in various registers before and after the execution.

Command: This area is marked “13” in Figure 6 and contains the PC value, the address of the order, its representation in Parliament, Transfer of Registration Language, op-code and command type.
I / O holes: I / O ports have a “14” label in Figure 6. These ports are available
user to enter input values ​​and visualize output performance values whenever an O / O occurs in the system. Input value for input functionality is provided by the user before executing the command. Release prices no is visible in the I / O port area when the command has been successfully executed.
Memory: Memory is divided into 2 parts and is marked “15” in Figure 6, to simplify viewing of data stored in various memory locations before, during and after after the implementation of the plan.
Processor’s State: Labeled as “16” in Figure 6, this area shows current values of the Instruction and Program Counter register while the program is running.

cs501 midterm solved papers by waqar siddhu,
cs501 midterm solved mcqs papers by moaaz,
cs502 midterm solved papers by moaaz,
cs501 quiz mega file,
cs501 past papers by moaaz,
cs501 short notes for midterm,
cs501 past papers final term by moaaz
cs501 midterm solved papers,
cs501 midterm past papers,
Search: The search option for FALCON-A simulator is marked “17” in Figure 6. This feature is similar to the FALCON-A search feature Assembler is active. Provides search string highlighting that goes as input, with the “All” and “Partial” options. Search results are highlighted in the file yellow color. It also shows the total number of games.
The following is a description of the options available in the button panel with the label
as “18” in Figure 6.
One Step: “Single Step” allows the user to create a program, one tutorial on time. The following command is not executed unless the user performs “one step” and. By default, the instructions to be used will be the following in the file sequence. It changes when the user specifies a different PC value using Change PC option (described below).
Switch PC: This option allows the user to change the PC value (Calculator System).
By changing the PC the user can perform the instructions on the PC set
Do: By selecting this button the user is able to execute commands with options to do with / without point input (see Fig. 5). If it happens for point placement, the user has the option to select from the official list breakpoint rates. It also has the option to set a limit at the time of execution.
The “Max Usage Time” option prevents scheduled execution
user-defined, and assists the simulator without management.
Change Register: Using the Registration Register feature, a user can change the value
presentation in a specific register.
Change Memory Word: This feature enables the user to change existing values ​​in
a specific memory location.

cs501 midterm solved papers by moaaz mega file

Display memory: Display memory shows an updated memory location, after
a specific memory location other than the existing one is specified by the user.
Change I / O: Allows the user to assign an I / O port value if the command will be
manufacture requires I / O performance. Provide input to any I / O ports areas before the course of the course, indicating that a particular I / O activity will be part of the system and there will be input from another source. Price provided by Display I / O: Display I / O works in the same way as Display Memory. Here the user specifies the first indication of the I / O port. he said at a set point.

See Also: